Job openings & fellowships Job openings
Select Page
Theses Defenses
December 9, 2026

Hour: From 15:00h to 16:00h

Place: ICFO Auditorium

Phd Thesis Defense: Engineered optical fiber structures for communication and quantum applications

DAVIDE RIZZOTTI
Optoelectronics, ICFO

Loss is one of the main limitations in optical systems. Classical applications are generally relatively tolerant to it: attenuation can often be compensated through amplification or post-processing, at the cost of increased complexity and cost. Quantum applications are fundamentally more sensitive because information is often encoded in single photons and is lost with them. Multi-photon states can be even more vulnerable, making system scalability exponentially sensitive to loss.
Current optical systems combine active and passive components. Active devices are generally based on highly nonlinear materials, such as silicon, indium phosphide, or lithium niobate, which are not ideal for low-loss propagation. Light is therefore typically coupled to silica optical fibers, the standard medium for passive transmission and interconnection between devices. Interfacing different material platforms, however, inevitably introduces additional coupling loss. This thesis aims to reduce this contribution by following an alternative approach: using optical fibers themselves as the active material minimizing the need to interface different platforms. The work focuses on two main devices, which eventually could even be combined.
The first project explores a novel fused fiber-bundle-like device containing embedded electrodes for active signal modulation. By relying on standard components and post-processing techniques similar to those used for fused fiber bundles, the structure can provide a low-loss interface between standard fibers and complex multi-material cross sections. I fabricated devices with a total insertion loss below 0.5 dB. Separately, I demonstrated light modulation through the DC-Kerr effect with a half-wave voltage below 20 kV. I then analyzed how these results could be combined and further improved toward an ultra-low-loss, electrically controlled fiber modulator.
The second project investigates silicon core fibers (SCFs), a type of fiber that consists of a crystalline silicon core surrounded by a pure silica cladding. To the best of my knowledge, I present the first experimental study of their use for quantum applications, specifically as a photon-pair source in the C-band based on intramodal four-wave mixing. A measured intrinsic brightness of 570 kHz/nm/mW^2, a coincidence-to-accidental ratio of 133±2, and a propagation loss of ≲0.3 dB/cm showed that SCFs can support room-temperature quantum sources with performance comparable to, and potentially better than, existing sources based on similar technologies. Coupling to SCFs was identified as the current main practical limitation of this platform, and I therefore proposed an alternative coupling strategy. The strategy is based on an adiabatic transition through fiber tapering between core-modes and cladding-modes, exploiting the fact that the cladding of both SCFs and standard fibers are made of the same material, namely pure silica. Simulations suggest that the coupler loss could ultimately be limited by propagation loss in the SCF section, while preliminary experiments reached a loss of 8.6 dB/coupler.
The results obtained during my PhD show that optical fiber-based devices represent a promising platform when minimizing loss is the primary performance objective. I envision quantum applications, specifically communication and memories, and reconfigurable classical networks to be the main fields of interests of ultra-low-loss active devices.

Wednesday December 9, 15:00 h. ICFO Auditorium
Thesis Director: Prof. Dr. Valerio Pruneri and Dr. Stefano Signorini

Theses Defenses
December 9, 2026

Hour: From 15:00h to 16:00h

Place: ICFO Auditorium

Phd Thesis Defense: Engineered optical fiber structures for communication and quantum applications

DAVIDE RIZZOTTI
Optoelectronics, ICFO

Loss is one of the main limitations in optical systems. Classical applications are generally relatively tolerant to it: attenuation can often be compensated through amplification or post-processing, at the cost of increased complexity and cost. Quantum applications are fundamentally more sensitive because information is often encoded in single photons and is lost with them. Multi-photon states can be even more vulnerable, making system scalability exponentially sensitive to loss.
Current optical systems combine active and passive components. Active devices are generally based on highly nonlinear materials, such as silicon, indium phosphide, or lithium niobate, which are not ideal for low-loss propagation. Light is therefore typically coupled to silica optical fibers, the standard medium for passive transmission and interconnection between devices. Interfacing different material platforms, however, inevitably introduces additional coupling loss. This thesis aims to reduce this contribution by following an alternative approach: using optical fibers themselves as the active material minimizing the need to interface different platforms. The work focuses on two main devices, which eventually could even be combined.
The first project explores a novel fused fiber-bundle-like device containing embedded electrodes for active signal modulation. By relying on standard components and post-processing techniques similar to those used for fused fiber bundles, the structure can provide a low-loss interface between standard fibers and complex multi-material cross sections. I fabricated devices with a total insertion loss below 0.5 dB. Separately, I demonstrated light modulation through the DC-Kerr effect with a half-wave voltage below 20 kV. I then analyzed how these results could be combined and further improved toward an ultra-low-loss, electrically controlled fiber modulator.
The second project investigates silicon core fibers (SCFs), a type of fiber that consists of a crystalline silicon core surrounded by a pure silica cladding. To the best of my knowledge, I present the first experimental study of their use for quantum applications, specifically as a photon-pair source in the C-band based on intramodal four-wave mixing. A measured intrinsic brightness of 570 kHz/nm/mW^2, a coincidence-to-accidental ratio of 133±2, and a propagation loss of ≲0.3 dB/cm showed that SCFs can support room-temperature quantum sources with performance comparable to, and potentially better than, existing sources based on similar technologies. Coupling to SCFs was identified as the current main practical limitation of this platform, and I therefore proposed an alternative coupling strategy. The strategy is based on an adiabatic transition through fiber tapering between core-modes and cladding-modes, exploiting the fact that the cladding of both SCFs and standard fibers are made of the same material, namely pure silica. Simulations suggest that the coupler loss could ultimately be limited by propagation loss in the SCF section, while preliminary experiments reached a loss of 8.6 dB/coupler.
The results obtained during my PhD show that optical fiber-based devices represent a promising platform when minimizing loss is the primary performance objective. I envision quantum applications, specifically communication and memories, and reconfigurable classical networks to be the main fields of interests of ultra-low-loss active devices.

Wednesday December 9, 15:00 h. ICFO Auditorium
Thesis Director: Prof. Dr. Valerio Pruneri and Dr. Stefano Signorini

All Theses Defenses